Earthworks In Stages – A Practical Guide

Earthworks In Stages – A Practical Guide

Whether you are constructing a new building, planning for renovation, carrying out landscaping work, or performing land expansion, earthwork efficiency will define the sustainability of the project.

While most people confuse earthwork with excavating, leveling, or shaping the terrain, it has more to do with modifying the composition and the consistency of the soil to provide a good structural foundation.

If you are looking for experts to provide earthwork construction services for your next project, look no further. D&J Site Construction is here with its professionals who can analyze the complicated rock formations and suggest a practical and effective solution to ensure your project’s ideal surface.

Click here to hire us today anywhere in Rio Grande Valley, Texas, at the most feasible rates!

However, before you do so, you might want to know how the earthworks will take place, right? So, here’s all the information you need to learn about the earthwork and its various stages, which must be respected for effective results.

1. Feasibility Study

Like any project, it is essential to conduct a close study on the feasibility of the project. According to the architect’s construction plans, the earthwork technicians carry out a descent on the ground to study the site and plan the work accordingly.

This step is fundamental since it highlights the ownership of the soil and the environment to be worked on, the procedures to be followed, and the means to be deployed to carry out the project.

2. Sanitation

After the field studies, the work begins with the various machines being deployed on the site. The next step is to evacuate any presence of puddles or water sources on the premises. This can be done by creating a sort of pipeline to the nearest wastewater networks. Otherwise, it will be necessary to pump the water by different hydraulic procedures.

3. Picketing

Work continues with ground marking procedures, including demarcation and staking. These two benefits are often confusing, but each has a very distinct purpose. By definition, boundary marking is a process that aims to demarcate the land by installing markers under the supervision of the surveyor.

On the other hand, staking is a technique used by the digger to mark the various characteristics of the excavation to be carried out, particularly the location of the foundations, the depth of the trenches, etc.

4. Stripping

Stripping is a step in landscaping that involves removing the top layer of vegetation – the surface layer of the soil. This layer is stored somewhere on the site to be reused at the end of the site stripping.

5. The Excavation

Following the instructions provided by the project manager, using the marks written on the picket line, the hydraulic machines are deployed to model the terrain, make the excavations, dig the trenches and build the foundation.

Here, different vehicles are used depending on the nature of the work and the site’s scope, such as the excavator, the vacuum excavator, the scraper, and various others.

6. Backfill

Finally, the digger uses several techniques to level the ground, compact the soil and ensure a solid finish. Leveling machines are used to fill in holes to level the ground. This step is a finishing procedure that defines the final appearance of the land.

Are you ready to get professionals on board? Click here to hire D&J Site Construction anywhere in Rio Grande Valley, Texas, to provide earthwork services at reasonable rates. We ensure using high-quality tools, machinery, and techniques to create an ideal surface for your construction project!