Sidewalk Repair 101 – How You Can Resurface Your Concrete Walkways

Sidewalk Repair 101 – How You Can Resurface Your Concrete Walkways

Concrete walkways are a necessary fixture that can be seen widely in Rio Grande Valley, TX, whether you are on the road, in the park, in front of shops, or any other commercial and residential space.

Unlike natural stones or tiles, concrete provides a smooth and non-slippery surface to walk on. Also, it’s inexpensive.

If you want to get a concrete walkway made, get in touch with a reliable paving company like D&J Site Construction. Click here to get your estimate today.

Concrete walkways receive extensive foot traffic, which is the main reason for their wear, then comes moisture.

So despite their sturdiness, concrete walkways develop cracks and start fading. Leaving you with two options – repair or repave.

Repaving will require the whole concrete surface to be removed, new material brought in, and of course, paving. So unless your walkway is already damaged, repaving is a waste of valuable time and money.

However, you can’t just do nothing. Regular maintenance work needs to be done to keep the concrete walkway sturdy and functional for a long-time.

Not doing the necessary repairs will aggregate the condition, causing many accidents, lawsuits, and damage.

In simple words, either you invest in minor repairs, or be ready to cuff up a lot more money on early repaving.

The best choice is sidewalk repair, and here’s how it’s done.

Step no. 1

To repair your concrete pathway in the garden, create a trench around the pavement. And duct tape any places you don’t want to coat.

Step no. 2

Install weather stripping tape in the walkway joints to keep out the mixture.

Otherwise, you can reform the control joints using a mortar rake once the resurfacer starts to harden. Don’t let the whole thing dry, or removing the excess from the joints would become impossible.

Ensure the joints are not filled because they are used to drain out the water, so the surface doesn’t crack.

Step no. 3

Sweep any leaves or litter off the pavement. Next, power wash the existing concrete pavement to remove all signs of dirt, stains, and debris.

If you already do regular cleaning and maintenance, then do a thorough sweep and moisten the concrete.

Step no. 4

Prepare your resurfacing mixture while the surface is still wet. Add water to the resurfacing powder and mix with a heavy-duty drill or paddle mixer attached to a corded drill. Try to keep water bubbles to a minimum.

Step no. 5

First, fill in all the cracks, then pour the resurfacing cement mixture on the surface. Use a squeegee or trowel to spread it in a smooth coat.

Step no. 6

5 to 15 minutes after spreading the mixture, when the concrete mix has set but not hardened, a soft-bristle push broom or nylon-bristle broom is used to create traction. Use the broom at a 90° angle from the expected foot traffic to make the surface slip-resistant.

Is your sidewalk damaged? Do you think it’s time to call in the professionals? If you are ready to get your concrete pathway repaired, then hit up D&J Site Construction. Just click here to get an estimate on your Rio Grande Valley, TX-based project.